Avaya certification 3605 exam questions and answers come out

ITCertKing can provide professional and high quality products. It is the industry leader in providing IT certification information. To selecte ITCertKing is to choose success. ITCertKing's Avaya 3605 exam training materials is your magic weapon to success. With it, you will pass the exam and achieve excellent results, towards your ideal place.

Avaya 3605 certification can guarantee you have good job prospects, because Avaya certification 3605 exam is a difficult test of IT knowledge, passing Avaya certification 3605 exam proves that your IT expertise a strong and you can be qualified for a good job.

ITCertKing is website that can take you access to the road of success. ITCertKing can provide the quickly passing Avaya certification 3605 exam training materials for you, which enable you to grasp the knowledge of the certification exam within a short period of time, and pass Avaya certification 3605 exam for only one-time.

You can first download ITCertKing's free exercises and answers about Avaya certification 3605 exam as a try, then you will feel that ITCertKing give you a reassurance for passing the exam. If you choose ITCertKing to provide you with the pertinence training, you can easily pass the Avaya certification 3605 exam.

Avaya 3605 is one of the important certification exams. ITCertKing's experienced IT experts through their extensive experience and professional IT expertise have come up with IT certification exam study materials to help people pass Avaya Certification 3605 exam successfully. ITCertKing's providing learning materials can not only help you 100% pass the exam, but also provide you a free one-year update service.

Exam Code: 3605
Exam Name: Avaya (Avaya Ethernet Routing Switch Implementation and Maintenance Exam)
One year free update, No help, Full refund!
Total Q&A: 173 Questions and Answers
Last Update: 2013-10-16

3605 Free Demo Download: http://www.itcertking.com/3605_exam.html

NO.1 When configuring a new Ethernet Routing Switch (ERS) 8000 using the default interface, the
attempt to load an ACLI configuration fails because the default interface is the CLI. How is the ACLI
interface obtained?
A. Change the interface type in the config.cfg file.
B. Change the ACLI boot flag and save the boot configuration file.
C. Exit the CLI and choose ACLI at the interface manager prompt.
D. Use the abort command and enter 'no' at the default interface.
Answer: C

Avaya exam prep   3605   3605   3605 answers real questions

NO.2 In a multicast campus, when should an ERS 8600 PIM interface be configured to run in passive
mode?
A. When the interface is used as an edge interface and is aggregating traffic.
B. When the interface is used as a core interface and needs to limit PIM messages to reduce the
system load.
C. When there are no unicast routing paths.
D. When more than one unicast routing protocol is in use.
Answer: A

Avaya   3605   3605 braindump

NO.3 The Ethernet Routing Switch (ERS) 8600 switch includes a means to fine tune the memory
resources by allowing the record allocations to be allowed. An ERS 8600 running Release 5.0 needs
to be configured to be optimized for multicast traffic. Which command alters the ERS 8600 to
increases the default allocation of Multicast by 50 percent?
A. Config sys set record record reserve MGID + 50
B. Config sys set max-vlan-resource-reservation 4096
C. Config sys set show sys mgid usage
D. Config sys set multicast-resource-reservation 3073
Answer: D

Avaya test questions   3605   3605 exam simulations   3605

NO.4 The SNMP counters check for authorization failures and other types error conditions. Which of
these SNMP error conditions is displayed in Enterprise Device Manager?
A. PCAP packet capture counters
B. In Bad Community Names counters
C. Fan Failure packet counters
D. Power Supply Failure packet counters
Answer: D

Avaya test   3605 test answers   3605

NO.5 What does Ping snoop identify?
A. The path that IP traffic takes over an MLT or SMLT
B. The rate of IP traffic flow
C. Which port filter is best to use on MLT networks
D. Rate limiting for ICMP traffic
Answer: A

Avaya certification   3605   3605 test   3605   3605 test questions

NO.6 The attempt to manage an Ethernet Routing Switch (ERS) 8000 using a Virtual Route
Redundancy Protocol (VRRP) address was not successful. What is causing this problem?
A. The virtual router identifier is 0.
B. The data center interface is set as a critical IP interface.
C. A real IP address is required for management access not a VRRP address.
D. The virtual router identifier is configured for the VRRP IP address owner.
Answer: C

Avaya questions   3605 practice test   3605   3605   3605

NO.7 By default the ERS 8000 is configured for warm standby. After installation of a new ERS
solution with dual CPUs, which three actions need to be Perform on the ERS configuration to ensure
high availability mode is enabled and will function correctly? (Choose three)
A. Set the high availability CPU boot flag to true.
B. Set the warm standby CPU hoot flag to false. C. Set the save to standby CPU boot flag to true.
D. Save the boot.cfg conflg file and reset the switch to activate the changes.
E. Install the high availability license file.
Answer: A,D,E

Avaya   3605 certification   3605 exam simulations

NO.8 What does the trace level 9 3 command accomplish?
A. It captures BGP events at a terse level.
B. It captures packets copied to the CPU at a verbose level.
C. It shows CPU utilization.
D. It captures RCC IP events at verbose level.
Answer: B

Avaya   3605   3605 answers real questions   3605 demo   3605

NO.9 Traceroute allows a route to be traced to a network using an Ethernet Routing Switch (ERS)
8600 CLI command. How could you use it to limit the number of hops the traceroute reports?
A. Configure the -P (base UDP port) to the number of maximum number hops.
B. Configure the -q (number of probes per TTL) to the number maximum number of hops.
C. Configure the -m (maximum TTL value) to the number of maximum number of hops.
D. Configure the -w (wait time per probe) to the number of maximum number of hops.
Answer: C

Avaya   3605 demo   3605 test questions   3605 certification

NO.10 A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in the
existing Ethernet Routing Switch (ERS) 8600-based core. The technician has to configure VRF on the
ERS 8600. Which statement represents the order for configuring a new VRF?
A. Creating a new VLAN, add an IP address to the VLAN, create the VRF in the VLAN configuration.
B. Create VRF, change context to the new VRF, add an IP address, create a new VLAN, and move the
VLAN to the new VRF.
C. Create a VRF, change context to the new VRF, create a new VLAN, add an IP address to the VLAN.
D. Create a VRF, create a new VLAN, move the VLAN to the new VRF, change context to the new VRF,
and add an IP Address.
Answer: D

Avaya   3605   3605 test   3605 practice test

ITCertKing offer the latest MB3-701 exam material and high-quality ACMA_6.1 pdf questions & answers. Our LOT-404 VCE testing engine and CAT-500 study guide can help you pass the real exam. High-quality E20-018 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/3605_exam.html