As long as you need the exam, we can update the Juniper certification JN0-201 exam training materials to meet your examination needs. ITCertKing's training materials contain many practice questions and answers about Juniper JN0-201 and they can 100% ensure you pass Juniper JN0-201 exam. With the training materials we provide, you can take a better preparation for the exam. And we will also provide you a year free update service.
ITCertKing is website that can help a lot of IT people realize their dreams. If you have a IT dream， then quickly click the click of ITCertKing. It has the best training materials, which is ITCertKing;s Juniper JN0-201 exam training materials. This training materials is what IT people are very wanted. Because it will make you pass the exam easily, since then rise higher and higher on your career path.
If you're still studying hard to pass the Juniper JN0-201 exam, ITCertKing help you to achieve your dream. We provide you with the best Juniper JN0-201 exam materials. It passed the test of practice, and with the best quality. It is better than Juniper JN0-201 tutorials and any other related materials. It can help you to pass the Juniper JN0-201 exam, and help you to become a strong IT expert.
Exam Code: JN0-201
Exam Name: Juniper (Juniper networks Certified internet associate.m(jncia-m))
One year free update, No help, Full refund!
Total Q&A: 120 Questions and Answers
Last Update: 2013-11-19
ITCertKing's Juniper certification JN0-201 exam testing exercises is very similar with real exam questions. If you choose ITCertKing's testing practice questions and answers, we will provide you with a year of free online update service. ITCertKing can 100% guarantee you to pass the exam, if you fail to pass the exam, we will full refund to you.
We are aware that the IT industry is a new industry. It is one of the chain to drive economic development. So its status can not be ignored. IT certification is one of the means of competition in the IT industry. Passed the certification exam you will get to a good rise. But pass the exam is not easy. It is recommended that using training tool to prepare for the exam. If you want to choose this certification training resources, ITCertKing's Juniper JN0-201 exam training materials will be the best choice. The success rate is 100%, and can ensure you pass the exam.
JN0-201 Free Demo Download: http://www.itcertking.com/JN0-201_exam.html
NO.1 Three IS-IS routers on a broadcast segment have different priority values configured. Which router is
elected the DIS on that broadcast segment?
A. the router with the lowest priority
B. the router with the highest priority
C. the router with the highest System ID
D. the router with the highest IP address
Answer: B
Juniper JN0-201 demo JN0-201
NO.2 Which CLI command is used to see the current OSPF link-state database?
A. show ospf database
B. show ospf neighbor
C. show protocols ospf
D. show ospf link-state
Answer: A
Juniper JN0-201 JN0-201 test answers JN0-201 certification training
NO.3 Two Level 2 routers are exchanging Hello packets with different Area IDs. What occurs between these
routers?
A. An Adjacency forms.
B. An Adjacency does not form.
C. An Adjacency forms but traffic is not forwarded.
D. No IS-IS PDUs are sent.
Answer: A
Juniper braindump JN0-201 JN0-201 JN0-201
NO.4 If all OSPF routers on a broadcast network have the same OSPF priority, what parameter is used to
determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
Answer: B
Juniper JN0-201 study guide JN0-201
NO.5 How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and
Level 2 adjacency?
A. set interface fe-0/0/0.0
B. set interface fe-0/0/0.0 all level
C. set interface fe-0/0/0.0 level 3 enable
D. set interface fe-0/0/0.0 level 1 level 2
Answer: A
Juniper JN0-201 test questions JN0-201 demo
NO.6 What are the three components of the ISO NET address? (Choose three.)
A. Area ID
B. N-selector
C. System ID
D. AS number
E. ISO number
F. MAC address
Answer: ABC
Juniper JN0-201 dumps JN0-201 questions
NO.7 A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect?
(Chose three.)
A. inbound traffic transiting the router
B. outbound traffic transiting the router
C. traffic destined to the Routing Engine
D. traffic destined to the interface address on which the filter is applied
Answer: ACD
Juniper JN0-201 JN0-201 questions JN0-201 JN0-201 exam prep
NO.8 What are two ways that a valid IBGP peering session can be configured? (Choose two.)
A. via the accept x.x/y command
B. via TCP reachable physical interface addresses
C. via remote loopbacks with the local-address command
D. via UDP with the neighbor x.x.x.x command at the group level
Answer: BC
Juniper demo JN0-201 JN0-201 JN0-201 original questions JN0-201 braindump
NO.9 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D
Juniper JN0-201 JN0-201 practice test JN0-201 exam dumps JN0-201 questions
NO.10 What is the first step in BGP route selection?
A. The local router prefers the route with the shortest AS_PATH.
B. The router first verifies that it has a route to the BGP Next Hop IP address.
C. The local router prefers the route from the peer with the lowest peer ID address.
D. The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
Answer: B
Juniper JN0-201 JN0-201 dumps JN0-201
NO.11 Assume that a comparable configuration is applied to your peer in AS 11 and that bi-directional TCP
reachability has been achieved. Which EBGP configuration will allow the BGP session to become
established?
A. routing-options { autonomous-system 64; } protocols { bgp { group external-peer11 { type external;
neighbor 10.0.3.6 { peer-as 11; } } }
B. routing-options { autonomous-system 11; } protocols { bgp { group external-peer1 { type external;
peer-as 11;{ neighbor 10.0.3.6; } }
C. routing-options { autonomous-system 11; } protocols { bgp { group external-peer11 { type external;
peer-as 64;{ neighbor 10.0.3.6; } group external-peer11 { type external; peer-as 64;{ neighbor
10.0.3.6; } } type external; peer-as 64;{ neighbor 10.0.3.6; } } peer-as 64;{ neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } }
D. routing-options { }
E. routing-options { autonomous-system 64; }
F. routing-options { autonomous-system 64; }
G. routing-options { autonomous-system 64; } protocols {
H. routing-options { autonomous-system 64; } protocols { bgp { autonomous-system 64; } protocols { bgp
{ group external-peer101 { } protocols { bgp { group external-peer101 { peer-as 101; protocols { bgp
{ group external-peer101 { peer-as 101; neighbor 10.0.3.6; protocols { bgp { group external-peer101
{ peer-as 101; neighbor 10.0.3.6; } bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; } }
group external-peer101 { peer-as 101; neighbor 10.0.3.6; } } peer-as 101; neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } } } } }
Answer: A
Juniper JN0-201 JN0-201 certification training JN0-201
NO.12 By default, which command can be used to display information about packets that have been logged
with the syslog firewall filter action?
A. show log
B. show firewall
C. show log messages
D. show firewall log
Answer: C
Juniper JN0-201 study guide JN0-201 dumps JN0-201 certification training
NO.13 Firewall filters can be used to accept, discard, or reject packets based on _____. (Choose three.)
A. protocol type
B. MAC address
C. TCP or UDP port
D. source and destination IP address
Answer: ACD
Juniper exam JN0-201 JN0-201 test JN0-201 questions
NO.14 How often are IS-IS Hello packets transmitted?
A. 3 seconds for DIS; 9 seconds for non-DIS
B. 9 seconds for DIS; 3 seconds for non-DIS
C. 10 seconds for DIS; 3 seconds for non-DIS
D. 10 seconds for all routers
Answer: A
Juniper original questions JN0-201 certification training JN0-201 answers real questions JN0-201 study guide
NO.15 What type of OSPF router is responsible for redistributing routes into OSPF?
A. ABR
B. ASBR
C. internal router
D. backbone router
Answer: B
Juniper JN0-201 JN0-201 JN0-201 exam simulations
NO.16 Once the TCP connection is established, which message type initiates the BGP peering process?
A. Open
B. Active
C. Update
D. Keepalive
E. Notification
Answer: A
Juniper JN0-201 certification training JN0-201 JN0-201 demo
NO.17 What are two purposes of the AS_PATH attribute? (Choose two.)
A. route selection
B. loop avoidance
C. determining equal cost paths for reachablilty
D. defining the application of other BGP attributes
Answer: AB
Juniper study guide JN0-201 exam prep JN0-201 JN0-201
NO.18 What command would you use to view an IS-IS adjacency?
A. show iso neighbor
B. show isis neighbor
C. show iso adjacency
D. show isis adjacency
Answer: D
Juniper JN0-201 JN0-201 JN0-201 JN0-201 certification training JN0-201 exam
NO.19 During OSPF adjacency formation, in what state is a router when it is negotiating to be in charge of the
database synchronization process?
A. Init
B. 2Way
C. ExStart
D. Exchange
Answer: C
Juniper test questions JN0-201 JN0-201
NO.20 What is the purpose of the OSPF link-state update packet?
A. describes a change to the OSPF hello timer
B. carries one or more link-state advertisements
C. establishes and maintains neighbor relationships
D. describes the contents of the entire link-state database
Answer: B
Juniper JN0-201 JN0-201 exam JN0-201
ITCertKing offer the latest E20-553 exam material and high-quality 1Z0-597 pdf questions & answers. Our 70-464 VCE testing engine and 00M-654 study guide can help you pass the real exam. High-quality dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertking.com/JN0-201_exam.html
没有评论:
发表评论